New Revision
DROV-PCB-071 is an ethernet to 2channel serial 232/422/485 configurable by jumpers and powered by AK-NORD XT-NANO
SKU DROV-PCB-071 REV2.0.2 · HS code 8517.62.0050
Description
The DROV-PCB-071 is a two-channel serial-to-Ethernet interface. It connects up to two RS232, RS422 or RS485 devices to a 10/100 Mbit Ethernet network, so that software on a PC can reach them over the network as if they were connected to local COM ports.
Each channel is set independently to RS232, RS422 (4-wire) or RS485 (2-wire) with jumpers on the board. On Windows, each channel appears as a virtual COM port (AK-VirtualCOM), and the serial settings chosen by the application are applied to the interface automatically. Linux systems and software that can open a TCP socket connect directly to the interface.
The interface is built around the AK-Nord XT-NANO-SXL embedded network module and is configured through its web page or Telnet. It runs from a 9–75 VDC supply.
Specs
Physical
| Length | 64 + 7(RJ45) |
|---|---|
| Width | 50 mm |
| Height | 21 mm |
| Weight | 0.06 kg |
Interface
| I/O Ports | 2CH Serial selectable 232/422/485 Up to 1Mbps |
|---|---|
| User Interface | Web setup |
| Control system | AK-Nord XT-NANO-SXL |
Electrical
| Input Voltage | 9-75VDC |
|---|---|
| Maxumim Power | 3 W |
Environmental
| Operating temperature | 0 to 70, non-condensing |
|---|
Contents
1x DROV-PCB-071 serial interface board
8x Selection jumpers (fitted)
Warranty
12-month return-to-depot warranty.
Includes parts and labor against manufacturing defects.
Excludes water damage and fair wear and tear.
1 year from the day you receive it.